Removal

LIGHTING (INT): GLOVE BOX LIGHT: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and the LH side Removal.

3. REMOVE FRONT DOOR OPENING TRIM COVER RH Removal

4. REMOVE SIDE INSTRUMENT PANEL RH Removal

5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

6. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Removal

7. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

8. REMOVE GLOVE BOX LIGHT ASSEMBLY

(a) Disengage the 2 claws and remove the glove box light assembly.