Installation

SEAT BELT: FRONT PASSENGER SEAT BELT WARNING LIGHT: INSTALLATION

1. INSTALL CLOCK ASSEMBLY (w/o Multi-display)

(a) Connect the connector.

(b) Install the cover with the 9 screws.

(d) Secure the panel with the 6 screws.

2. INSTALL RADIO RECEIVER ASSEMBLY (w/o Multi-display) Installation

3. INSTALL NO. 2 RADIO BRACKET (w/o Multi-display) Installation

4. INSTALL NO. 1 RADIO BRACKET (w/o Multi-display) Installation

5. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Multi-display) Installation

6. INSTALL CLOCK ASSEMBLY (w/ Multi-display)

(a) Engage the 2 clips and install the clock assembly.

7. INSTALL RADIO RECEIVER ASSEMBLY (w/ Multi-display) Installation

8. INSTALL NO. 2 RADIO BRACKET (w/ Multi-display) Installation

9. INSTALL NO. 1 RADIO BRACKET (w/ Multi-display) Installation

10. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Multi-display) Installation

11. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Installation

12. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

13. INSTALL FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY Installation

14. INSTALL CONSOLE PANEL SUB-ASSEMBLY Installation

15. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH Installation

16. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH Installation

17. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

18. ADJUST CLOCK