Removal

BRAKE (REAR): REAR BRAKE FLEXIBLE HOSE: REMOVAL

HINT
* Use the same procedure for the RH side and LH side.
* The following procedure is for the LH side.

1. REMOVE REAR WHEEL

2. DRAIN BRAKE FLUID

NOTICE:
Immediately wash off any brake fluid that comes into contact with any painted surfaces.

3. REMOVE REAR FLEXIBLE HOSE

(a) Using a union nut wrench (10 mm), disconnect the rear flexible hose from the brake line.





NOTICE:
* Do not kink or damage the brake line.
* Do not allow any foreign matter such as dirt and dust to enter the brake line.

(b) Remove the clip from the rear flexible hose, and separate the rear flexible hose from the body bracket.

(c) Remove the bolt and gasket, and remove the rear flexible hose from the rear disc brake cylinder assembly.