Removal

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING ANTENNA (for Front Side): REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE FRONT WHEEL RH

4. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

HINT
Perform the same procedure as for the LH side Removal.

5. REMOVE FRONT FENDER LINER RH

HINT
Perform the same procedure as for the LH side Removal.

6. REMOVE FRONT TIRE PRESSURE ANTENNA RH

(a) Remove the nut.





(b) Disconnect the connector and remove the front tire pressure antenna RH.