Installation

METER / GAUGE / DISPLAY: COMBINATION METER: INSTALLATION

1. INSTALL COMBINATION METER ASSEMBLY

(a) Position the combination meter assembly on the steering column as shown in the illustration.





NOTICE:
Do not damage the instrument panel safety pad or combination meter assembly.

(b) Connect the connectors.

(c) Engage the 2 positioning pins of the combination meter assembly.





Text in Illustration





(d) Engage the 2 claws to install the combination meter assembly.

(e) Remove the protective tape.

2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY Installation

3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

(a) Install the 2 clips.





(b) Install the instrument cluster finish panel sub-assembly with the 2 screws.





4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

5. INSTALL INSTRUMENT SIDE PANEL LH Installation

6. INSTALL FRONT DOOR OPENING TRIM COVER LH Installation

7. INSTALL DOOR SCUFF PLATE ASSEMBLY LH Installation

8. INSTALL STEERING COLUMN COVER Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL