Reassembly

SEAT: REAR SEAT ASSEMBLY: REASSEMBLY

1. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER RH

(a) Using hog ring pliers, install 8 new hog rings.

NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, avoid wrinkling the cover.

(b) Using hog ring pliers, install the separate type rear seat cushion cover RH with 24 new hog rings.

NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, avoid wrinkling the cover.

2. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER LH

(a) Using hog ring pliers, install 8 new hog rings.

NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, avoid wrinkling the cover.

3. INSTALL REAR SEAT HEADREST CABLE

(a) Engage the 4 clamps to install the rear seat headrest cable to the rear seatback frame.

4. INSTALL REAR SEAT HEADREST ASSEMBLY RH

(a) Install the rear seat headrest assembly RH with 4 new nuts.

Torque : 14 Nm (143 kgf-cm, 10 ft-lbf)

5. INSTALL REAR SEAT HEADREST ASSEMBLY LH

(a) Install the rear seat headrest assembly LH with 4 new nuts.

Torque : 14 Nm (143 kgf-cm, 10 ft-lbf)

6. INSTALL REAR SEATBACK PROTECTOR ASSEMBLY RH

(a) Engage the guide and 2 claws.

(b) Install the rear seatback protector assembly RH with the 2 screws.

7. INSTALL REAR SEATBACK PROTECTOR ASSEMBLY LH

(a) Engage the guide and 2 claws.

(b) Install the rear seatback protector assembly LH with the 2 screws.

8. INSTALL BENCH TYPE REAR SEATBACK COVER

(a) Using hog ring pliers, install 19 new hog rings.

NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, avoid wrinkling the cover.

(b) Using hog ring pliers, install the bench type rear seatback cover to the bench type rear seatback pad with 33 new hog rings.

NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, avoid wrinkling the cover.