B2790

THEFT DETERRENT / KEYLESS ENTRY: ENGINE IMMOBILISER SYSTEM: B2790: ID BOX EEPROM Malfunction
B2790 - ID BOX EEPROM Malfunction

DESCRIPTION

This DTC is stored when the ID code box (immobiliser code ECU) detects an internal malfunction.





INSPECTION PROCEDURE

NOTICE:
* If the ID code box (immobiliser code ECU) is replaced, register the ECU code and ECU communication ID Engine Immobilizer System.
* If the certification ECU (smart key ECU assembly) is replaced, register all the keys Engine Immobilizer System.

PROCEDURE

1. REPLACE ID CODE BOX (IMMOBILISER CODE ECU)

(a) Replace the ID code box (immobiliser code ECU) Removal.

NEXT -- Continue to next step.

2. ECU CODE REGISTRATION

(a) Register the ECU code Engine Immobilizer System.

NEXT -- Continue to next step.

3. ECU COMMUNICATION ID REGISTRATION

(a) Register the ECU communication ID Engine Immobilizer System.

NEXT -- Continue to next step.

4. CHECK DTC OUTPUT

(a) Clear the DTCs Engine Immobilizer System.

(b) Recheck for DTCs Engine Immobilizer System.

OK:

DTC B2790 is not output.

NG -- REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) Removal

OK -- END (ID CODE BOX (IMMOBILISER CODE ECU) WAS DEFECTIVE)