Connecting Rod: Specifications

Connecting Rod Cap
Step 1 40 Nm (408 kgf-cm, 30 ft-lbf)
Step 2 90°

Connecting Rod Thrust Clearance
Standard thrust clearance 0.15 to 0.40 mm (0.0059 to 0.0157 in.)
Maximum thrust clearance 0.50 mm (0.020 in.)

Connecting Rod Oil Clearance
Standard oil clearance 0.045 to 0.067 mm (0.0018 to 0.0026 in.)
Maximum oil clearance 0.070 mm (0.0028 in.)

Connecting Rod Bushing Inside Diameter
Mark A 22.005 to 22.008 mm (0.8663 to 0.8665 in.)
Mark B 22.008 to 22.011 mm (0.8665 to 0.8666 in.)
Mark C 22.011 to 22.014 mm (0.8666 to 0.8667 in.)