Reassembly

HEATING / AIR CONDITIONING: CONDENSER: REASSEMBLY

1. INSTALL COOLER DRYER

(a) Using pliers, install a new cooler dryer to the modulator.





(b) Apply sufficient compressor oil to the O-ring and the fitting surface on a cap.





Compressor oil:

ND-OIL 8 or equivalent

(c) Using a 14 mm straight hexagon wrench, install the cap to the cooler condenser core.





Torque : 2.9 Nm (30 kgf-cm, 26 in-lbf)