Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER

(a) Install the tire pressure warning ECU and receiver with the bolt.





Torque : 4.5 Nm (46 kgf-cm, 40 in-lbf)

(b) Connect the connector.

2. INSTALL RADIO RECEIVER ASSEMBLY

HINT
Refer to the instructions for installation of the radio receiver assembly Installation.

3. REGISTER OF TRANSMITTER ID

HINT
Registration

4. INSPECT TIRE PRESSURE WARNING SYSTEM

HINT
Test Mode Procedure