Meter

METER: STEERING PAD SWITCH: INSTALLATION

1. INSTALL STEERING PAD SWITCH ASSEMBLY

(a) Engage the 4 pins.





(b) Install the steering pad switch assembly with the 2 screws.

(c) Connect the 2 connectors and engage the clamp.





2. INSTALL STEERING PAD Installation

3. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

4. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

6. INSPECT STEERING PAD Installation

7. INSPECT SRS WARNING LIGHT

Diagnosis System