Installation

CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: INSTALLATION

1. INSTALL CRUISE CONTROL MAIN SWITCH

(a) Install the cruise control main switch with the 2 screws.





Torque : 1.7 to 3.0 Nm (17 to 31 kgf-cm, 15 to 27 in-lbf)

(b) Connect the connector.

2. INSTALL STEERING PAD Installation

3. INSTALL NO. 3 LOWER STEERING WHEEL COVER

4. INSTALL NO. 2 LOWER STEERING WHEEL COVER

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

6. INSPECT SRS WARNING LIGHT

Diagnosis System