Removal

SUPPLEMENTAL RESTRAINT SYSTEM: REAR AIRBAG SENSOR: REMOVAL

HINT
* Use the same procedures for the RH side and LH side.
* The procedures listed below are for the LH side.

1. PRECAUTION

CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

3. REMOVE REAR SEAT CUSHION ASSEMBLY Removal

4. REMOVE REAR SEAT HEADREST ASSEMBLY

5. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY

6. REMOVE REAR SEATBACK ASSEMBLY Removal

7. REMOVE REAR DOOR SCUFF PLATE Removal

8. REMOVE REAR SEAT SIDE GARNISH Removal

9. REMOVE REAR AIRBAG SENSOR

(a) Disconnect the connector.





(b) Remove the bolt and rear airbag sensor.