Removal

4GR-FSE FUEL: FUEL PRESSURE SENSOR: REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL Removal

2. REMOVE ENGINE ROOM SIDE COVER LH Removal

3. REMOVE ENGINE ROOM SIDE COVER RH Removal

4. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

5. REMOVE FRONT UPPER FENDER PROTECTOR LH Removal

6. REMOVE FRONT UPPER FENDER PROTECTOR RH

HINT
Removal procedure of the RH side is the same as that of the LH side.

7. REMOVE ROOF DRIP SIDE FINISH MOULDING LH

8. REMOVE ROOF DRIP SIDE FINISH MOULDING RH

HINT
Removal procedure of the RH side is the same as that of the LH side.

9. REMOVE FRONT WIPER ARM HEAD CAP Removal

10. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal

11. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal

12. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Removal

13. DISCHARGE FUEL SYSTEM PRESSURE

HINT
Service Precautions.

14. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

15. DRAIN ENGINE COOLANT Testing and Inspection

16. DISCONNECT NO. 2 VENTILATION HOSE Removal

17. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE Removal

18. REMOVE THROTTLE WITH MOTOR BODY ASSEMBLY Removal

19. REMOVE COLD START INJECTOR Removal

20. REMOVE INTAKE AIR SURGE TANK Removal

21. REMOVE INTAKE MANIFOLD Removal

22. DISCONNECT WATER HOSE JOINT Removal

23. REMOVE NO. 1 FUEL PIPE Removal

24. REMOVE FUEL PRESSURE SENSOR





(a) Disconnect the connector and clamp.

(b) Remove the fuel pressure sensor and gasket.