Installation

LIGHTING: HIGH INTENSITY DISCHARGE HEADLIGHT BULB: INSTALLATION

1. INSTALL DISCHARGE HEADLIGHT BULB

(a) Install the discharge headlight bulb.

NOTICE:
After the discharge headlight bulb is replaced, make sure that it comes on. Then, reinstall all the parts that were removed to replace the bulb.

2. INSTALL NO. 1 HEADLIGHT COVER GASKET

(a) Install a new No. 1 headlight cover gasket.

3. INSTALL NO. 1 HEADLIGHT BACK COVER

(a) Install the No. 1 headlight back cover.

4. INSTALL WASHER HOSE (for LH Side)

(a) Install the washer hose with the bolt.





Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

5. INSTALL ENGINE ROOM SIDE COVER LH (for LH Side) Installation

6. INSTALL ENGINE ROOM SIDE COVER RH (for RH Side) Installation

7. INSTALL COOL AIR INTAKE DUCT SEAL Installation

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL