Installation

BRAKE CONTROL: REAR SPEED SENSOR: INSTALLATION

1. INSTALL REAR SPEED SENSOR

(a) Install the rear speed sensor with the bolt.





Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)

NOTICE:
Prevent foreign matter from attaching to the sensor tip.

(b) Connect the speed sensor connector.

2. INSTALL REAR WHEEL

(a) Install the rear wheel.

Torque : 103 Nm (1,050 kgf-cm, 76 ft-lbf)

3. INSPECT SPEED SENSOR SIGNAL

Test Mode Procedure