Installation

BRAKE CONTROL: FRONT SPEED SENSOR (for 4WD): INSTALLATION

1. INSTALL FRONT SPEED SENSOR

(a) Install the front speed sensor with the bolt.





Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)

NOTICE:
Prevent foreign matter from attaching to the sensor tip.

(b) Connect the front speed sensor connector.

2. INSTALL FRONT WHEEL

Torque : 103 Nm (1,050 kgf-cm, 76 ft-lbf)

3. INSPECT SPEED SENSOR SIGNAL

Test Mode Procedure