Installation

EXTERIOR: FRONT BUMPER: INSTALLATION

1. INSTALL FRONT BUMPER ASSEMBLY

(a) Connect the 2 fog light connectors.

(b) w/ Intuitive Parking Assist System:

(1) Connect the ultrasonic sensor connector.

(c) w/ Headlight Cleaner System:

(1) Connect the headlight cleaner hose to the windshield washer jar and pump assembly.

(d) Engage the 10 claws and install the front bumper assembly.





(e) Install the 2 clips and screw.

(f) Install the 8 screws.

(g) Install the screw.

HINT
Use the same procedure for the RH side and LH side.

(h) Position the groove on each pin hold clip vertically and insert the 2 pin hold clips to install the front bumper assembly.





Text in Illustration





NOTICE:
Make sure that the groove on the pin hold clip is positioned vertically.

HINT
Use the same procedure for the RH side and LH side.

2. INSTALL RADIATOR GRILLE PROTECTOR

(a) Install the 2 radiator grille protectors.

3. INSTALL COOL AIR INTAKE DUCT SEAL

(a) Install the cool air intake duct seal with the 11 clips.

4. ADJUST FOG LIGHT AIMING

Adjustments