Meter

METER: STEERING PAD SWITCH: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

2. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal

3. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal

4. REMOVE STEERING PAD Removal

5. REMOVE STEERING PAD SWITCH ASSEMBLY

(a) Disconnect the 2 connectors and disengage the clamp.





(b) Remove the 2 screws.





(c) Disengage the 4 pins and remove the steering pad switch assembly.