Diagnosis System

CELLULAR COMMUNICATION: SAFETY CONNECT SYSTEM: DIAGNOSIS SYSTEM

1. DESCRIPTION

(a) The DCM (Telematics Transceiver) controls the vehicle Safety Connect system functions. Safety Connect system data and Diagnostic Trouble Codes (DTCs) can be read through the vehicle Data Link Connector 3 (DLC3). In some cases, a malfunction may be occurring in the Safety Connect system. When the system seems to be malfunctioning, use the Techstream to check for malfunctions and perform repairs.

2. CHECK DLC3

(a) Check the DLC3 General Information.

3. INSPECT BATTERY VOLTAGE

(a) Measure the battery voltage.

Standard Voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery.

4. CHECK INDICATOR

(a) When a malfunction is detected in the Safety Connect system, the manual (SOS) switch red indicator on the manual (SOS) switch illuminates to inform the driver of the malfunction System Description.