Installation

PARK ASSIST / MONITORING: CLEARANCE WARNING BUZZER: INSTALLATION

1. INSTALL CLEARANCE WARNING BUZZER

(a) Engage the clamp to install the clearance warning buzzer.

(b) Connect the connector.

2. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Multi-display) Installation

3. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Multi-display) Installation

4. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Installation

5. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

6. INSTALL FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY (w/ Ashtray) Installation

7. INSTALL INSTRUMENT PANEL BOX ASSEMBLY (w/o Ashtray) Installation

8. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Installation

9. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Installation

10. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) Installation

11. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission) Installation

12. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission) Installation

13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission)

14. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Navigation System for HDD)

16. ADJUST CLOCK