Removal

PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Rear Side): REMOVAL

1. REMOVE REAR BUMPER ASSEMBLY

Removal

2. REMOVE NO. 1 ULTRASONIC SENSOR (for Corner Sensor)

(a) Disconnect the sensor connector.

(b) Disengage the 2 claws and remove the No. 1 ultrasonic sensor.





(c) Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the ultrasonic sensor clip as shown in the illustration.





Text in Illustration





3. REMOVE NO. 3 ULTRASONIC SENSOR RETAINER (for Corner Sensor)

(a) Disengage the 4 claws and remove the No. 3 ultrasonic sensor retainer from the rear bumper assembly.





4. REMOVE NO. 2 ULTRASONIC SENSOR (for Back Sensor)

(a) Disconnect the sensor connector.

(b) Disengage the 2 claws and remove the No. 2 ultrasonic sensor.





(c) Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the ultrasonic sensor clip as shown in the illustration.





Text in Illustration





5. REMOVE NO. 3 ULTRASONIC SENSOR RETAINER (for Back Sensor)

(a) Disengage the 4 claws and remove the No. 3 ultrasonic sensor retainer from the rear bumper assembly.