Removal

PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Front Side): REMOVAL

1. REMOVE FRONT BUMPER ASSEMBLY

Removal

2. REMOVE NO. 1 ULTRASONIC SENSOR

(a) Disconnect the sensor connector.

(b) Disengage the 2 claws and remove the No. 1 ultrasonic sensor.





HINT
The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

3. REMOVE NO. 3 ULTRASONIC SENSOR RETAINER

(a) Disengage the 4 claws and remove the No. 3 ultrasonic sensor retainer from the front bumper assembly.





HINT
The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.