Crankshaft Main Bearing

Crankshaft bearing cap bolts





Step 1
Torque 20 Nm (204 kgf-cm, 15 ft-lbf)





Retighten the 10 main bearing cap bolts in the sequence shown
Torque 40 Nm (408 kgf-cm, 30 ft-lbf)

Step 2
Retighten the bearing cap bolts 90° in the numerical order shown

Standard thrust clearance 0.04 to 0.24 mm (0.00157 to 0.00945 in.)
Maximum thrust clearance 0.30 mm (0.0118 in.)

Main bearing oil clearance

Standard oil clearance 0.017 to 0.040 mm (0.000669 to 0.00157 in.)
Maximum oil clearance 0.060 mm (0.00236 in.)

Standard Cylinder Block Journal Bore Diameter:





Standard Crankshaft Journal Diameter:





Standard Bearing Center Wall Thickness: