Installation

2AZ-FXE EMISSION CONTROL: PURGE VALVE: INSTALLATION

1. INSTALL NO. 1 VACUUM SWITCHING VALVE ASSEMBLY

(a) Install the No. 1 vacuum switching valve assembly to the air cleaner hose.

(b) Connect the 2 fuel vapor feed hoses.

(c) Connect the connector and wire harness clamp.

2. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY Installation

3. INSTALL COWL BODY MOUNTING REINFORCEMENT RH Installation

4. INSTALL NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL Installation

5. INSTALL WATER GUARD PLATE RH Installation

6. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

(a) Install the windshield wiper motor and link assembly Installation.