Removal

PARKING BRAKE: PARKING BRAKE PEDAL: REMOVAL

1. REMOVE AIR CONDITIONING UNIT

HINT
Refer to the instructions for Removal of the air conditioning unit Removal.

2. REMOVE FRONT SEAT ASSEMBLY LH

HINT
Refer to the instructions for Removal of the front seat assembly Removal.

3. REMOVE FRONT SEAT ASSEMBLY RH

HINT
Perform the same procedure as for the LH side.

4. REMOVE NO. 2 BELT ANCHOR REINFORCEMENT SUB-ASSEMBLY

(a) Disengage the wire harness clamp.

(b) Disconnect the indoor electrical key antenna assembly connector.

(c) Remove the 4 nuts and No. 2 belt anchor reinforcement sub-assembly.

5. REMOVE NO. 3 BELT ANCHOR REINFORCEMENT SUB-ASSEMBLY

(a) Disengage the 2 wire harness clamps.

(b) Remove the 4 bolts and No. 3 belt anchor reinforcement sub-assembly.

6. LOOSEN ADJUSTING NUT

(a) Remove the lock nut and loosen the adjusting nut.

Text in Illustration

7. SEPARATE NO. 1 PARKING BRAKE CABLE ASSEMBLY

(a) Separate the No. 1 parking brake cable assembly from the No. 1 parking brake pull rod sub-assembly as shown in the illustration.

Text in Illustration

8. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY

(a) Remove the 5 bolts and nut, and disengage the clamp to separate the No. 1 parking brake cable assembly.

(b) Disconnect the parking brake switch connector.