Reassembly

BRAKE SYSTEM (OTHER): BRAKE PEDAL: REASSEMBLY

1. INSTALL BRAKE PEDAL PAD

2. INSTALL BRAKE PEDAL BUSHING

(a) Apply lithium soap base glycol grease to 2 new brake pedal bushings.

(b) Install the 2 brake pedal bushings to the brake pedal sub-assembly.

3. INSTALL BRAKE PEDAL SHAFT COLLAR

(a) Install the brake pedal shaft collar to the brake pedal sub-assembly.

4. INSTALL BRAKE PEDAL SUB-ASSEMBLY

(a) Install the brake pedal sub-assembly to the brake pedal support sub-assembly with the brake pedal shaft and nut.





Torque : 17 Nm (176 kgf-cm, 13 ft-lbf)