Installation

SEAT: FRONT SEATBACK HEATER: INSTALLATION

1. INSTALL SEPARATE TYPE FRONT SEATBACK COVER

(a) Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 14 new hog rings.





NOTICE:
* Be careful not to damage the cover.
* When installing the hog rings, take care to minimize wrinkles as much as possible.

2. INSTALL FRONT SEATBACK COVER WITH PAD Reassembly

3. INSTALL FRONT SEAT HEADREST SUPPORT LH Reassembly

4. INSTALL FRONT SEAT HEADREST SUPPORT RH Reassembly

5. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY Reassembly

6. INSTALL FRONT SEAT CUSHION COVER WITH PAD Reassembly

7. INSTALL FRONT SEAT CUSHION INNER SHIELD Reassembly

8. INSTALL FRONT SEAT INNER BELT ASSEMBLY Installation

9. INSTALL POWER SEAT SWITCH (w/o Memory) Reassembly

10. INSTALL POWER SEAT SWITCH (w/ Memory) Reassembly

11. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY Reassembly

12. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB Reassembly

13. INSTALL RECLINING POWER SEAT SWITCH KNOB Reassembly

14. INSTALL FRONT SEAT HEADREST ASSEMBLY Reassembly

15. INSTALL FRONT SEAT ASSEMBLY Installation

16. ZERO POINT CALIBRATION (for Front Passenger Side)

(a) Perform zero point calibration and sensitivity check Programming and Relearning.

17. INSTALL REAR INNER SEAT TRACK BRACKET COVER Installation

18. INSTALL REAR OUTER SEAT TRACK BRACKET COVER Installation

19. INSTALL FRONT INNER SEAT TRACK BRACKET COVER Installation

20. INSTALL FRONT OUTER SEAT TRACK BRACKET COVER Installation

21. INSPECT FRONT SEAT ASSEMBLY Installation

22. INSPECT SRS WARNING LIGHT

Diagnosis System

23. INSTALL LUGGAGE COMPARTMENT FLOOR MAT Installation