Removal

U660E AUTOMATIC TRANSAXLE: TRANSMISSION CONTROL CABLE ASSEMBLY: REMOVAL

1. REMOVE AIR CONDITIONING UNIT

HINT
Removal

2. REMOVE CENTER AIRBAG SENSOR ASSEMBLY Removal

3. REMOVE COOL AIR INTAKE DUCT SEAL Removal

4. REMOVE ENGINE ROOM SIDE COVER LH Removal

5. REMOVE AIR CLEANER INLET ASSEMBLY Removal

6. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

7. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

8. REMOVE NO. 1 AIR CLEANER INLET Removal

9. DISCONNECT NO. 2 SHIFT CABLE GROMMET RETAINER

(a) Turn back the carpet.





(b) Remove the 2 bolts and disconnect the No. 2 shift cable grommet retainer.

(c) Remove the No. 2 shift cable grommet retainer.

10. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

(a) Disconnect the end of the transmission control cable assembly from the shift lever assembly.





(b) Disconnect the transmission control cable assembly from the shift lever assembly while pushing the 2 claws of the floor shift cable.

(c) Remove the nut and transmission control cable from the control shaft lever.





(d) Remove the clip and disconnect the transmission control cable assembly from the No. 1 control cable bracket.





(e) Pull out the transmission control cable assembly from the body.