Installation

U660E AUTOMATIC TRANSAXLE: ATF TEMPERATURE SENSOR: INSTALLATION

1. INSTALL ATF TEMPERATURE SENSOR ASSEMBLY

(a) Coat a new O-ring with ATF and install it to the ATF temperature sensor assembly.





(b) Coat the 4 bolts with ATF.

(c) Install the ATF temperature sensor assembly and clamp to the valve body with the 4 bolts.





Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)

Bolt length:

Bolt A
25 mm (0.98 in.)

Bolt B
85 mm (3.35 in.)

(d) Connect the connector.

2. INSTALL VALVE BODY OIL STRAINER ASSEMBLY Installation

3. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY Installation

4. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY

HINT
Installation