Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING SELECT SWITCH: INSTALLATION

1. INSTALL TIRE PRESSURE WARNING SELECT SWITCH

(a) Engage the 2 claws to install the tire pressure warning select switch to the No. 2 instrument panel under cover sub-assembly.





2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. INSPECT TIRE PRESSURE WARNING SYSTEM

HINT
Test Mode Procedure