Installation

LIGHTING: HEIGHT CONTROL SENSOR: INSTALLATION

1. INSTALL HEIGHT CONTROL SENSOR SUB-ASSEMBLY REAR RH

(a) Install the height control sensor sub-assembly rear RH with the 3 nuts.





Rear suspension member side - Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

Lower arm side - Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(b) Connect the connector.

2. HEIGHT CONTROL SENSOR SIGNAL INITIALIZATION

Initialization.

3. VEHICLE PREPARATION FOR HEADLIGHT AIM ADJUSTMENT Adjustments

4. PREPARATION FOR HEADLIGHT AIMING (Using a headlight aim test machine) Adjustments

5. PREPARATION FOR HEADLIGHT AIMING (Using a Screen) Adjustments

6. HEADLIGHT AIMING INSPECTION Adjustments

7. HEADLIGHT AIMING ADJUSTMENT Adjustments