Installation

CELLULAR COMMUNICATION: TELEPHONE AND GPS ANTENNA: INSTALLATION

1. INSTALL TELEPHONE AND GPS ANTENNA

(a) for Standard Roof:

(1) Engage the 2 claws to install the telephone and GPS antenna.

(2) Place the antenna cord in the cutout of the antenna nut.





Text in Illustration





(3) Install the telephone and GPS antenna with the antenna nut.

Torque : 4.5 Nm (46 kgf-cm, 40 in-lbf)

(b) for Glass Roof:

(1) Engage the 2 claws to install a new telephone and GPS antenna.

NOTICE:
* Be careful not to remove the red insulating paint on the fitting surface of the satellite radio antenna assembly when installing it.
* If the red insulating paint on the satellite radio antenna assembly is removed, replace it with a new one.

(2) Place the antenna cord in the cutout of the antenna nut.





Text in Illustration





(3) Install the telephone and GPS antenna with the antenna nut.

Torque : 4.5 Nm (46 kgf-cm, 40 in-lbf)

2. INSTALL TELEPHONE ANTENNA PROTECTOR

(a) Engage the 2 claws and install the telephone antenna protector.

(b) Connect the connector.

(c) Connect the 2 claws.

3. INSTALL ROOF HEADLINING ASSEMBLY

(a) Install the roof headlining assembly Installation.