Reassembly

2ZR-FXE LUBRICATION: OIL PUMP: REASSEMBLY

1. INSTALL OIL PUMP COVER SUB-ASSEMBLY

(a) Coat the oil pump drive and driven rotors with engine oil, and place them into the oil pump with the marks facing the oil pump cover side.





Text in Illustration





(b) Install the oil pump cover with the 5 bolts.





Torque : 8.8 Nm (90 kgf-cm, 78 in-lbf)

2. INSTALL OIL PUMP RELIEF VALVE

(a) Coat the relief valve with engine oil.





Text in Illustration





(b) Insert the relief valve and valve spring into the pump body hole.

(c) Using a 27 mm socket wrench, install the plug.

Torque : 49 Nm (500 kgf-cm, 37 ft-lbf)