Removal

NAVIGATION / MULTI INFO DISPLAY: MULTI-DISPLAY: REMOVAL

1. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Removal

2. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal

3. REMOVE MULTI-DISPLAY SUB-ASSEMBLY

(a) Push the outside part of the multi-display and tilt it as shown in the illustration.





(b) Disconnect the 5 claws.





(c) Disengage the 4 guides and remove the instrument panel finish panel end.

(d) Remove the 2 screws.





(e) Disengage the 2 clips as shown in the illustration.





(f) Disengage the clamp.

(g) Disconnect earth connector and remove the multi-display sub-assembly.