Installation

1UR-FSE FUEL: FUEL RELIEF VALVE: INSTALLATION

1. INSTALL FUEL RELIEF VALVE ASSEMBLY

(a) Install a new gasket to the relief valve.





(b) Using a 14 mm deep socket wrench, install the relief valve to the No. 2 delivery pipe.

Torque : 29 Nm (296 kgf-cm, 21 ft-lbf)

NOTICE:
* Do not apply oil to the threads of the relief valve and delivery pipe.
* Do not allow foreign matter to enter the pipe during the installation.

(c) Install the No. 1 fuel pipe.

(d) Connect the No. 3 fuel hose.





2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY





3. INSTALL INTAKE MANIFOLD

(a) Install the intake manifold Installation.

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

5. PERFORM INITIALIZATION

(a) Perform initialization Repair Instruction - Initialization.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

6. ADD ENGINE COOLANT Service and Repair

7. INSPECT FOR COOLANT LEAK Component Tests and General Diagnostics

8. INSPECT FOR FUEL LEAK Fuel System