Installation

LIGHTING: AUTOMATIC LIGHT CONTROL SENSOR: INSTALLATION

1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR

(a) Attach the 2 claws and install the automatic control sensor.





(b) Connect the connector.

2. INSTALL DEFROSTER NOZZLE ASSEMBLY Reassembly

3. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT Reassembly

4. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT Reassembly

5. INSTALL INSTRUMENT PANEL SAFETY PAD Installation

6. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

7. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

8. INSTALL TIRE PRESSURE WARNING ECU Reassembly

9. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY Installation

10. INSTALL NO. 1 SPEAKER HOLE COVER Installation

11. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for LH) Installation

12. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL Installation

13. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for RH) Installation

14. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL Installation

15. INSTALL FRONT PILLAR GARNISH LH Installation

16. INSTALL FRONT PILLAR GARNISH RH Installation

17. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY WITH BRACKET (w/o Navigation System) Installation

18. INSTALL MULTI-DISPLAY ASSEMBLY WITH BRACKET (for DVD) Installation

19. INSTALL DISPLAY AND NAVIGATION ASSEMBLY WITH BRACKET (for HDD) Installation

20. INSTALL RADIO RECEIVER ASSEMBLY Installation

21. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

22. INSTALL NO. 2 INSTRUMENT PANEL LOWER AIRBAG Installation

23. INSTALL INSTRUMENT PANEL LOWER Installation

24. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER Installation

25. INSTALL NO. 2 INSTRUMENT CLUSTER Installation

26. INSTALL INSTRUMENT SIDE PANEL RH Installation

27. INSTALL NO. 1 INSTRUMENT PANEL LOWER AIRBAG Installation

28. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD Installation

29. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER Installation

30. INSTALL NO. 1 INSTRUMENT CLUSTER MOULDING Installation

31. INSTALL INSTRUMENT SIDE PANEL LH Installation

32. INSTALL COMBINATION METER ASSEMBLY Removal

33. INSTALL INSTRUMENT CLUSTER FINISH PANEL Installation

34. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE Installation

35. INSTALL STEERING COLUMN COVER (w/o Driver Monitor Camera) Installation

36. INSTALL STEERING COLUMN COVER (w/ Driver Monitor Camera) Installation

37. INSTALL STEERING WHEEL ASSEMBLY Installation

38. INSTALL STEERING PAD ASSEMBLY Installation

39. INSTALL NO. 2 STEERING WHEEL COVER LOWER Installation

40. INSTALL WITCH AND VOLUME CASE Installation

41. INSTALL CONSOLE BOX ASSEMBLY Installation

42. INSTALL CONSOLE COVER LOWER Installation

43. INSTALL CONSOLE REAR END PANEL Installation

44. INSTALL CONSOLE PANEL SUB-ASSEMBLY UPPER Installation

45. INSTALL REAR CONSOLE PANEL UPPER Installation

46. INSTALL NO. 3 BOX PANEL Installation

47. INSTALL SHIFT LEVER KNOB Installation

48. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

49. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

50. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

CAUTION:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

NOTICE:
Reset the AUTO TILT AWAY function setting to the previous condition by changing the customize parameter Programming and Relearning.

51. INSTALL COWL TOP VENTILATOR LOUVER RH Installation

52. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.