Removal

AUDIO / VISUAL: TELEVISION DISPLAY (for Roof): REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
* w/ Navigation System (for HDD):
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:

* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE SPOT LIGHT LENS

(a) Detach the 4 claws and remove the lens.

4. REMOVE ROOF CONSOLE BOX ASSEMBLY

(a) Remove the 2 screws.

(b) Detach the 6 clips and 2 claws.

(c) w/o Infrared Rays Sensor:

Disconnect the connector and remove the roof console box.

(d) w/ Infrared Rays Sensor:

Disconnect the 2 connectors and remove the roof console box.

5. REMOVE TELEVISION DISPLAY ASSEMBLY

(a) Disconnect the connectors.

(b) Remove the 4 nuts.