Removal

A960E AUTOMATIC TRANSMISSION: SHIFT LEVER ASSEMBLY: REMOVAL

1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

2. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH Removal

3. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH Removal

4. REMOVE CONSOLE PANEL SUB-ASSEMBLY Removal

5. REMOVE INSTRUMENT PANEL BOX ASSEMBLY (w/o Ashtray) Removal

6. REMOVE FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY (w/ Ashtray) Removal

7. REMOVE CONSOLE BOX REGISTER ASSEMBLY (w/o Ashtray) Removal

8. REMOVE CONSOLE BOX REGISTER ASSEMBLY (w/ Ashtray) Removal

9. REMOVE CONSOLE BOX Removal

10. REMOVE NO. 2 CONSOLE BOX DUCT Removal

11. REMOVE NO. 1 FLOOR UNDER COVER Removal

12. REMOVE NO. 2 FLOOR UNDER COVER Removal

13. REMOVE REAR NO. 1 FLOOR PANEL BRACE Removal

14. REMOVE FRONT CENTER FLOOR BRACE Removal

15. REMOVE OXYGEN SENSOR Removal

16. REMOVE FRONT EXHAUST PIPE ASSEMBLY Removal

17. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR Removal

18. REMOVE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

(a) Remove the nut and separate the floor shift gear shifting rod sub-assembly.





19. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY

(a) Disconnect the 2 connectors.





(b) Remove the 4 bolts.

(c) Remove the floor shift assembly.