B15A8

CELLULAR COMMUNICATION: SAFETY CONNECT SYSTEM: B15A8: Telematics Transceiver Malfunction
B15A8 - Telematics Transceiver Malfunction

DESCRIPTION

This DTC is set when an error in the EEPROM or PLL IC is detected on the DCM (Telematics Transceiver) self-check. The EEPROM (Electrically Erasable Programmable Read-Only Memory) stores the various data to operate the Safety Connect system. The PLL IC (Phase-Locked Loop Integrated Circuit) oscillates telephone radio frequency.





INSPECTION PROCEDURE

NOTICE:
Regardless of whether DTC B15A8 has been output as a present or history DTC, the DCM (Telematics Transceiver) should be replaced.

PROCEDURE

1. REPLACE DCM (TELEMATICS TRANSCEIVER)

(a) Replace the DCM (Telematics Transceiver) Removal.

NOTICE:
* The engine switch must be off.
* Do not swap the DCM (Telematics Transceiver) with one from another vehicle.

NEXT -- PERFORM DCM ACTIVATION DCM Activation