Removal

2AZ-FXE EMISSION CONTROL: PURGE VALVE: REMOVAL

1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

(a) Remove the windshield wiper motor and link assembly Removal.

2. REMOVE WATER GUARD PLATE RH Removal

3. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL Removal

4. REMOVE COWL BODY MOUNTING REINFORCEMENT RH Removal

5. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY Removal

6. REMOVE NO. 1 VACUUM SWITCHING VALVE ASSEMBLY

(a) Disconnect the connector and wire harness clamp.





(b) Disconnect the 2 fuel vapor feed hoses.

(c) Remove the No. 1 vacuum switching valve assembly from the air cleaner hose.