Installation

METER / GAUGE / DISPLAY: CLOCK: INSTALLATION

1. INSTALL CLOCK ASSEMBLY (MULTI-DISPLAY)

(a) Install the clock assembly (multi-display) with the 2 screws.

2. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Installation

3. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

4. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Installation

5. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

6. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Installation

8. INSTALL LUGGAGE COMPARTMENT FLOOR MAT Installation

9. ADJUST CLOCK