Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: SKID CONTROL BUZZER: REMOVAL

NOTICE:
While the battery is connected, even if the power switch is off, the brake control system activates when the brake pedal is depressed or any door courtesy switch is turned on. Therefore, when servicing the brake system components, do not depress the brake pedal or open/close the doors while the battery is connected.

1. REMOVE POWER STEERING ECU ASSEMBLY

HINT
Refer to the procedure up to Remove Power Steering ECU Assembly Removal.

2. REMOVE SKID CONTROL BUZZER ASSEMBLY

(a) Remove the skid control buzzer assembly.





(b) Disconnect the skid control buzzer connector.