Installation

2AZ-FXE LUBRICATION: ENGINE OIL COOLER: INSTALLATION

1. INSTALL ENGINE OIL COOLER

(a) Clean the oil cooler contact surface.

(b) Install a new O-ring to the oil cooler.





Text in Illustration





(c) Apply a light coat of engine oil to the threads and under the head of the oil cooler union bolt.





(d) Install the oil cooler with the plate washer, oil cooler union bolt and nut.

for union bolt - Torque : 79 Nm (800 kgf-cm, 58 ft-lbf)

for nut - Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)

(e) Connect the 2 oil cooler hoses.

2. INSTALL OIL FILTER SUB-ASSEMBLY

HINT
Replacement.

3. ADD COOLANT (for Engine) Service and Repair

4. INSPECT FOR OIL LEAK

5. INSPECT FOR COOLANT LEAK (for Engine) Testing and Inspection

6. CHECK ENGINE OIL LEVEL Testing and Inspection