Disposal

BRAKE SYSTEM (OTHER): BRAKE BOOSTER PUMP: DISPOSAL

1. DISPOSE OF BRAKE BOOSTER PUMP ASSEMBLY

(a) Remove the accumulator from the brake booster pump assembly.

(b) Secure the accumulator in a vise.

(c) Using a hacksaw, make a cut in the side of the accumulator at location A to release the high-pressure gas.









CAUTION:
Small pieces of metal may fly out when cutting into the accumulator. Put a cloth over the hacksaw when cutting the accumulator. Cut the accumulator slowly so that the gas will be released gradually.

HINT
The gas is colorless, odorless and non-poisonous.