Removal

BRAKE SYSTEM (OTHER): BRAKE PEDAL: REMOVAL

1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

2. REMOVE POWER STEERING ECU ASSEMBLY

HINT
Refer to the procedure up to Remove Power Steering ECU Assembly Removal.

3. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY

HINT
Refer to the procedure up to Remove Brake Pedal Stroke Sensor Assembly Removal.

4. REMOVE STOP LIGHT SWITCH ASSEMBLY Removal

5. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

6. REMOVE BRAKE PEDAL RETURN SPRING

(a) Remove the brake pedal return spring from the brake pedal support sub-assembly and push rod pin.





7. REMOVE COLUMN HOLE COVER SILENCER SHEET

(a) Turn back the floor carpet.

(b) Remove the 2 clips and column hole cover silencer sheet.





8. SEPARATE NO. 2 STEERING INTERMEDIATE SHAFT ASSEMBLY

(a) Put matchmarks on the No. 2 steering intermediate shaft assembly and steering intermediate shaft.





Text in Illustration





(b) Remove the bolt and separate the No. 2 steering intermediate shaft assembly from the steering intermediate shaft.

9. REMOVE PUSH ROD PIN

(a) Remove the clip and push rod pin to separate the brake pedal sub-assembly from the push rod clevis.





10. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY

(a) Disengage the clamp.





(b) Remove the bolt and separate the brake pedal support assembly from the instrument panel reinforcement.

(c) Remove the 4 nuts and brake pedal support assembly.





(d) Remove the nut from the brake pedal support assembly.