Installation

DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: INSTALLATION

1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY

(a) Pass the hood lock control cable assembly into the engine compartment.

(b) Pass the cable through the upper radiator support.

(c) Engage each clamp.

(d) Connect the hood lock control cable assembly.

2. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

(a) Connect the hood lock control cable assembly to the hood lock control lever sub-assembly.

(b) Engage the claw and 2 guides to install the hood lock control lever sub-assembly.

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL Installation

4. INSTALL INSTRUMENT SIDE PANEL LH Installation

5. INSTALL COWL SIDE TRIM BOARD LH Installation

6. INSTALL FRONT DOOR OPENING TRIM COVER LH Installation

7. INSTALL FRONT DOOR SCUFF PLATE LH Installation

8. INSTALL FRONT FENDER LINER LH

HINT
Use the same procedure for the RH side and LH side Installation.

9. INSTALL FRONT WHEEL LH

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)

10. INSTALL COOL AIR INTAKE DUCT SEAL Installation