Removal

AUDIO / VIDEO: REAR PACKAGE TRAY SPEAKER: REMOVAL

1. PRECAUTION (w/ Navigation System)

NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL Removal

4. REMOVE REAR SEAT CUSHION ASSEMBLY Removal

5. REMOVE REAR SEAT CUSHION LOCK HOOK Removal

6. REMOVE REAR SEAT HEADREST ASSEMBLY LH Removal

7. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY Removal

8. REMOVE REAR SEAT HEADREST ASSEMBLY RH Removal

9. REMOVE REAR SEATBACK ASSEMBLY Removal

10. REMOVE REAR DOOR SCUFF PLATE LH Removal

11. REMOVE REAR DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and LH side Removal.

12. REMOVE REAR SEAT SIDE AIRBAG ASSEMBLY LH Removal

13. REMOVE REAR SEAT SIDE AIRBAG ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side Removal.

14. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH Removal

15. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side Removal.

16. DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH Removal

17. DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH Removal

18. DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH Removal

19. REMOVE REAR SEAT SHOULDER BELT COVER Removal

20. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade) Removal

21. REMOVE CENTER STOP LIGHT SET Removal

22. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade) Removal

23. REMOVE REAR STEREO COMPONENT SPEAKER ASSEMBLY

(a) Disconnect the connector.





(b) Remove the 4 bolts and rear stereo component speaker assembly.

NOTICE:
Do not touch the cone part of the speaker.

24. REMOVE NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade) Removal

25. REMOVE REAR NO. 3 SPEAKER ASSEMBLY (for 15 Speakers)

(a) Disconnect the connector.





(b) Remove the bolt.

(c) Disengage the guide and remove the rear No. 3 speaker assembly.

NOTICE:
Do not touch the cone part of the speaker.