Installation

LIGHTING: HEADLIGHT DIMMER SWITCH: INSTALLATION

1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY





(a) Install the headlight dimmer switch with the claw as shown in the illustration.

HINT
Make sure that the claw is completely engaged.





Install the headlight dimmer switch with the clamp.

(b) Connect the connector.

2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY Installation

3. INSTALL SPIRAL CABLE SUB-ASSEMBLY WITH STEERING SENSOR Installation

4. INSTALL STEERING COLUMN COVER UPPER Installation

5. REMOVE STEERING COLUMN COVER LOWER Installation

6. ADJUST SPIRAL CABLE SUB-ASSEMBLY WITH STEERING SENSOR Installation

7. INSTALL STEERING WHEEL ASSEMBLY Installation

8. INSPECT STEERING WHEEL CENTER POINT

9. INSTALL STEERING PAD Installation

10. INSTALL NO. 3 STEERING WHEEL COVER LOWER

11. INSTALL NO. 2 STEERING WHEEL COVER LOWER

12. CONNECT CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

13. INSPECT STEERING PAD Installation

14. PERFORM INITIALIZATION

(a) Perform initialization Repair Instruction - Initialization.

CAUTION:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

15. INSPECT SRS WARNING LIGHT

Service Precautions