Installation

BRAKE CONTROL: STEERING ANGLE SENSOR: INSTALLATION

1. INSTALL STEERING SENSOR

(a) Align the locating pins, engage the claws and install the steering sensor to the spiral cable sub-assembly





2. INSTALL SPIRAL CABLE SUB-ASSEMBLY WITH STEERING SENSOR Installation

3. INSTALL STEERING COLUMN COVER

for 2GR-FSE Installation

for 1UR-FSE Installation

4. CENTER SPIRAL CABLE Installation

5. INSTALL STEERING WHEEL ASSEMBLY

for 2GR-FSE Installation

for 1UR-FSE Installation

6. INSTALL HORN BUTTON ASSEMBLY Installation

7. INSPECT STEERING WHEEL CENTER POINT

8. CONNECT BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

9. INSPECT HORN BUTTON ASSEMBLY Installation

10. INSPECT SRS WARNING LIGHT

Diagnosis System